MP50 Hydraulic Struts

All hydraulic struts have a double acting hydraulic ram with an integral lock-off valve for simple, safe installation and removal.

50 and 80 tonne capacity, medium-duty hydraulic strutting system
For raking, horizontal or knee brace propping applications
Operating range from 2.4m to over 18m
Fixed length extensions for coarse length adjustment
Double-acting hydraulics for fine length adjustment
Range of swivel end fittings for multi-angle connections
Full temporary works service available

Add to Basket

Designs will factor in an allowance of 100mm on either end to mitigate issues faced on site.

Related Products

MP150 Hydraulic Struts

The MP150 is a modular format medium-duty hydraulically activated strut consisting of a hydraulic ram unit with a 1100mm stroke for fine length adjustment. Swivel end bearing units allow for various strutting alignments within an excavation with or without waling beams.

MP250 Hydraulic Strut

The MP250 is a modular format high load capacity hydraulic strut combining the compressive strength of steel tube with the convenience of hydraulic actuation for length adjustment and pre-loading potential. Swivel end bearing units allow for various strutting alignments within an excavation, with or without waling beams.

Pumps

Manual Shoring Pumps provide the means to hydraulically expand, pressurise and retract Groundforce hydraulically operated shoring equipment. Hand pumps are generally recommended for use with smaller equipment where the volume of fluid within the internal rams is relatively small. For larger bracing frames and struts, motorised pumps are recommended.

Lifting Chains

Lifting Chains are specifically configured for lifting Groundforce shoring equipment and are available in a range of lengths, legs and capacities.