Vibration Monitor

The Piletec Vibration Monitor is the most efficient and high-quality vibration monitoring system on the market. Using Microelectromechanical Systems (MEMS) technology, it takes accurate measurements and sends data wirelessly to the online web platform.

The Piletec Vibration Monitor features fully integrated and automated solutions for the measurement, monitoring and reporting of vibration in the construction and infrastructure sectors. It is a compact and lightweight system with auto-axis alignment allowing it to be installed in any location and any orientation, including ceilings.

A range of battery, mains and solar power options are available to facilitate a wide range of scenarios.

Add to Basket

Accurate Measurements

The Piletec Vibration Monitor provides simultaneous PPV & VDV measurements in accordance with UK measurement standards (BS5228-2, BS7385-2 & BS6472-1) and is independently tested for compliance with DIN45669-1:2010, SBR-A and fully CE Marked.

Real-time Alerting

Scheduled and real-time email and SMS alerts can be configured for up to 50 recipients in the event of limit exceedances, power outages or software updates.

The Online Portal

The online portal is a mobile-optimised cloud-based management platform. It is customisable in just a few simple clicks and gives uninterrupted remote monitor configuration and review of measured data. Measurement data is automatically sent to the Honeycomb platform via 4G/LTE. Wi-Fi connectivity and an (optional) Power over Ethernet adaptor is also available for use in challenging scenarios.

Instant Reporting

Instantly produced PDF, CSV and Excel reports of measured data can be scheduled to send via email either daily or weekly. The reports can include a summary of exceedances and, if required, can incorporate your individual company’s logo.

Related Products

V901 Vibration Monitor

The V901 is battery powered portable vibration monitoring equipment, purpose designed for ground vibration monitoring of blasting, piling, demolition, construction and traffic vibrations.

Impact Hammer

The DX20 Excavator-Mounted Impact Hammer is designed for driving Sheet Piles and Steel Tubes. Fitted with a Tilt/Rotator and Quick Hitch Adapter for optimum manoeuvrability when connected to a suitable excavator. When connected to the excavators Quick Hitch, the hammer can be quickly lifted from a horizontal transport position to a vertical position. Side tilt adjustment of five degrees left and right allows the hammer to cope with site conditions.

Piling Hammer (EMV)

Piling Hammers (EMVs) are specifically designed as a sheet piling attachment for excavators. They have a high power to weight ratio due to the high operating frequency and can apply an additional vertical force from the excavator to assist driving if required. This type of excavator mounted sheet pile driver is ideally suited to cohesive, granular soil conditions and can significantly decrease driving time, reduce noise and minimise potentially hazardous vibrations.

Side Grip Piling Hammer

The Side Grip Piling Hammer is an excavator-mounted vibratory pile hammer that can hold the pile or tube from the side and drive/pull the pile from this profile, meaning they are ideal when working in limited heights. The greatest advantage of the Side Grip Piling Hammer is that sheet piles can be used that are much longer than the reach of the excavator boom, meaning you can install and remove long sheet piles using your own excavator.