MP30 Mechanical Strut

The MP30 is a modular format light-duty mechanically operated strut. The strut consists of a mechanical unit with a 150mm stroke for fine length adjustment and a combination of fixed length extension pieces. The mechanical extension and retraction is made by turning the fixed threaded jack section. For specific component configuration, see the job specific design details.

The MP30 is a relatively lightweight system comprised of man-handleable components, perfect for locations where space is limited.
End bearing plates incorporate a zero moment swivel pin connection and can articulate up to +/- 45° from the strut axis for knee brace and raking applications.
Can be equipped with a single or a pair of screw jacks to allow for up to 290mm of adjustment.

Add to Basket

Twin Soldiers

Using the Multi-way connectors two soldiers can be paired together to produce a lightweight strut of higher capacity than the single soldier option. Once again the strut can be used with or without the Universal Back Plate depending on the application required and the Swivel End Bearing Plate may be rotated to allow horizontal or vertical inclination.

Related Products

MP60 Mechanical Strut

The MP60 is a modular format medium-duty mechanically adjustable strut, combining the compressive strength of steel tube with the convenience of mechanical length adjustment. MP60’s are used where single or multi-directional support is required to excavations or cofferdams and mechanical, as opposed to hydraulic adjustment is preferred.

MP50 Hydraulic Struts

All hydraulic struts have a double acting hydraulic ram with an integral lock-off valve for simple, safe installation and removal.

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

Trench Sheet (Standard)

Groundforce Shorco offer a comprehensive range of cold formed lapped trench sheets and interlocking light pile sections to provide a cost effective solution for most excavation support applications. Many of the sections are produced from high yield steel which provides an exceptional strength-to-weight ratio resulting excellent durability whilst driving and resistance to on-site damage.