MP150 Hydraulic Struts

The MP150 is a modular format medium-duty hydraulically activated strut consisting of a hydraulic ram unit with a 1100mm stroke for fine length adjustment. Swivel end bearing units allow for various strutting alignments within an excavation with or without waling beams.

For raking, horizontal or knee brace propping applications
Operating range from 2.4m to over 25m
Fixed length extensions for coarse length adjustment
Double-acting hydraulics for fine length adjustment
Range of swivel end fittings for multi-angle connections
Full temporary works service available

Add to Basket

Using extension pieces, the MP150 has a practical operating range of 3.6m to 20.0m without intermediate support and can withstand working loads up to150 tonnes.

The hydraulic extension and retraction of the ram is made using a hand operated or motorised pump with two hoses connected to the ram via quick release couplings located to one side of the hydraulic unit.

Related Products

MP250 Hydraulic Strut

The MP250 is a modular format high load capacity hydraulic strut combining the compressive strength of steel tube with the convenience of hydraulic actuation for length adjustment and pre-loading potential. Swivel end bearing units allow for various strutting alignments within an excavation, with or without waling beams.

MP375

The MP375 is a modular format heavy-duty hydraulically activated strut consisting of a hydraulic ram unit with a 1300mm stroke for fine length adjustment. For higher load and/or longer span applications, it is possible to combine the hydraulic unit with extension pieces using appropriate adaptor components. Swivel end bearing units allow for various strutting alignments within an excavation with or without waling beams.

MP250 Hydraulic Strut (Super Extensions)

The MP250 is a modular format heavy-duty hydraulically activated strut consisting of a hydraulic ram unit with a 1050mm stroke for fine length adjustment. For higher load and/or longer span applications, it is possible to combine the hydraulic unit with extension pieces using appropriate adaptor pieces. Swivel end bearing units allow for various strutting alignments within an excavation with or without waling beams.

Pumps

Manual Shoring Pumps provide the means to hydraulically expand, pressurise and retract Groundforce hydraulically operated shoring equipment. Hand pumps are generally recommended for use with smaller equipment where the volume of fluid within the internal rams is relatively small. For larger bracing frames and struts, motorised pumps are recommended.