MP250 Hydraulic Strut (Super Extensions)

The MP250 is a modular format heavy-duty hydraulically activated strut consisting of a hydraulic ram unit with a 1050mm stroke for fine length adjustment. For higher load and/or longer span applications, it is possible to combine the hydraulic unit with extension pieces using appropriate adaptor pieces. Swivel end bearing units allow for various strutting alignments within an excavation with or without waling beams.

A heavy-duty proprietary strutting system extending the operating range of the MP250 to 45m at full capacity
Additional intermediate support from below is not necessary. Utilises 1220mm diameter fixed length extensions for coarse length adjustment
Double-acting hydraulics for fine length adjustment
Range of swivel end fittings for multi-angle connections

Add to Basket

The MP250 has a practical operating range of 3.1m to 25.0m without intermediate support and can withstand working loads up to 250 tonnes at shorter spans.

The hydraulic extension and retraction of the ram is made using a hand operated or motorised pump with two hoses connected to the ram via quick release couplings located to one side of the hydraulic unit.

Related Products

MP250 Hydraulic Strut

The MP250 is a modular format high load capacity hydraulic strut combining the compressive strength of steel tube with the convenience of hydraulic actuation for length adjustment and pre-loading potential. Swivel end bearing units allow for various strutting alignments within an excavation, with or without waling beams.

MP375

The MP375 is a modular format heavy-duty hydraulically activated strut consisting of a hydraulic ram unit with a 1300mm stroke for fine length adjustment. For higher load and/or longer span applications, it is possible to combine the hydraulic unit with extension pieces using appropriate adaptor components. Swivel end bearing units allow for various strutting alignments within an excavation with or without waling beams.

Mega Brace

The Mega Brace is a high load capacity modular hydraulic bracing system designed to support square, rectangular or multi-sided excavations ranging from 3.0m to 20.0m in plan.

Pumps

Manual Shoring Pumps provide the means to hydraulically expand, pressurise and retract Groundforce hydraulically operated shoring equipment. Hand pumps are generally recommended for use with smaller equipment where the volume of fluid within the internal rams is relatively small. For larger bracing frames and struts, motorised pumps are recommended.