Coffin Shaped Units

The standard coffin shaped unit uses model 22 cylinders.

If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.

Add to Basket

Unit Length	Internal Clearance	Unit Depth	Weight of each panel (kg)	Unit Weight - When using 2 model 22 cylinders (kg)
2135mm (7'0")	1935mm (6'5")	285mm (1'0)	16	40
		435mm (1'6")	20	48
		585mm (2'0")	27	62
2288mm (7'6")	2088mm (6'10")	285mm (1'0")	18	44
		435mm (1'6")	22	52
		585mm (2'0")	31	70
2440mm (8'0")	2240mm (7'5")	285mm (1'0")	20	48
		435mm (1'6")	24	56
		585mm (2'0")	33	74

Note: The imperial figures stated above are approximate nominal measurements

Gravshore - Groundforce ToolBox Talks Video

This Groundforce Toolbox talks video guides you through the Gravshore sector of Groundforce. Specialising in the shoring of graves, this video shows the assembly, installation and dismantling of the Gravshore equipment.

Enquire Now

Related Products

End Support Units

Gravshore End Support Units consists of support posts and either aluminium trench sheets or panels. Gravshore end support units are available to provide extra cover at both ends of the excavation. The unit simply consists of a support post and end panel or aluminium trench sheet.

Rectangular Units

The standard rectangular unit uses model 36 cylinders, and ranges in overall length from 1525mm (5') to 2440mm (8')If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.

Tapered Units

The standard tapered unit uses one model 22 cylinder, and one model 36 cylinder as shown on the illustration.If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.

Water Pumps

When there is potential water ingress into the excavation or grave we can supply motorised water pumps complete with suction hoses.