Model

 MS1 HFB MS3 HFB MS4 HFB
Weight (kg) 350 830 1230
Max. centrifugal force (kN) 90 296 374
Eccentric moment (kgm) 0.7 3 4.2
Max. oil flow (l/min) 102 120 171
Max. working pressure (bar) 300 300 300

 

  230M (B) 328M (B) 428M (B) 625M (B) 823b E5 FM E7 FM
Eccentric moment (kgm) 2.2 3.2 4 6 8 4.6 6.6
Max. centrifugal force (kN) 220 275 345 410 464 395 452
Max. frequency (rpm) 3000 2800 2800 2300 (2500) 2300 2800 2500
Max. amplitude (incl univ damp) (mm) 7 (6) 9.5 (8.5) 10 (9) 14.5 (13) 19.1 10 16
Max. static line pull (kN) 100 100 120 120 120 120 120
Dynamic weight (incl univ damp) (kg) 640 (720) 660 (740) 795 (900) 825 (930) 940 700 705
Total weight (incl univ clamp) (kg) 875 (1080) 885 (1090) 1065 (1280) 1095 (1300) 1310 1495 1515
Height A (excluding bracket) (mm) 1095 (1320) 1095 (1320) 1145 (1388) 1145 (1388) 1115 1378 1379
Width B (mm) 575 (530) 575 (530) 710 (612) 710 (612) 612 725 767
Length C (mm) 1230 (1115) 1230 (1115) 1300 (1115) 1300 (1115) 1003 1380 1380
Depth D (mm) 258 258 300 300 385 344

344
Power Pack  ICE 100 ICE 100 ICE 180RF ICE 180RF ICE 330RF N/A N/A

You May Also Like

Gooseneck Extension

Gooseneck Extension

The Gooseneck Extension is used to extend the vibrator’s height and reach and is simply mounted on the jib of the excavator. This facility is particularly useful for driving longer piles in soft ground conditions where there is a need to reach over and down embankments or to clear obstructions etc. As well being compatible with the hammer models listed in the table above, the Gooseneck can also be used with the more powerful E5FM and E7FM Excavator Mounted Vibrators.

VibroSafe Quick Hitch Adaptor

VibroSafe Quick Hitch Adaptor

The Piletec VibroSafe Quick Hitch Adaptor is a specially developed piece of equipment that is exclusive to Piletec. The VibroSafe connects Excavator Mounted Vibratory Hammers via the excavator’s quick hitch system. The adaptor comes pre-assembled; eliminating the need for the fitting or removal of bolts and pins. The VibroSafe can be used with 90% of all quick hitch systems from 12–25 tonne excavators.

Larssen Sheet Piles

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

V901 Vibration Monitor

V901 Vibration Monitor

The V901 is battery powered portable vibration monitoring equipment, purpose designed for ground vibration monitoring of blasting, piling, demolition, construction and traffic vibrations.